Your present location:
High temperature incineration treatment

High temperature incineration treatment

Ø Types of waste: mainly treat various solid, liquid and semi-solid wastes such as paint, distillation residue, organic resin, organic solvent, sludge, etc.;

Ø Feeding system: There are eight sets of feeding devices, including three sets of solid feeding devices and five sets of liquid feeding devices. According to the different nature and status of the waste, various types of hazardous wastes pass through different The feed path of the material enters the incinerator;

Ø Incineration system: Combining the advantages of pyrolysis gasification incinerator and rotary kiln incinerator, the combustion temperature can reach 1350℃, and the residence time of flue gas in the second combustion chamber is >2 seconds, thereby fully decomposing harmful substances; residual heat The boiler can recover most of the heat energy in the flue gas for reuse;

Ø Flue gas treatment system: The incinerator adopts the principle design of "3T", adopts internationally advanced dioxin control technology and acid gas purification system, and combines activated carbon spray adsorption for deep purification treatment to ensure that the exhaust gas is better than the national standard ;

Ø Control of secondary pollutants: A 24-hour real-time online monitoring and analysis system is installed in the middle of the chimney to monitor more than ten indicators such as smoke, SO2, NOx, and HCl to ensure compliance; at the same time, the slag, fly ash, etc. generated after high-temperature incineration are monitored in real time. After TCLP inspection, send to the hazardous waste safe landfill for solidification/safe landfill treatment; the generated wastewater is sent to the physical and chemical wastewater workshop for treatment.



Copyright©2021 Huizhou Dongjiang Veolia Environmental Service Co., Ltd.